6000 SERIES SANDER
The 6000 Series machine will brush sand and/or wire brush parts with standard widths of 25, 37 and 49 inches. It has 2 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter and 50 inches long. It has a fixed height conveyor and accommodates parts up to 9 inches thick.
The spindles are belt driven with full power down to 450 RPM. Speed and direction are controlled from the touchscreen. Each motor’s load is also displayed.
Inverters control the feed rate, the spindles’ speed, and rotational direction. Load meters aid setup and help maintain consistent results. Larger diameter sanding and wire brushes deliver best results.
Outfeed / Infeed End of the 6000 Series
See the 5000 Series in Action!
- Spindle Motors: 2, 3, 5, 7.5 or 10HP
- Voltage: 208-240V, 400-480V, or 575V 3ph
- Variable Speed: AC Inverter, 200-900rpm
- Spindles: 1.25” Dia.
- Conveyor: 25, 37, 49 inch wide, 4-47 ft/min
- Opening Height: Up to 9”
Larick Machinery is a Ft. Collins Colorado based machine manufacturing company that was acquired by Pillar Machine in the Fall of 2022.
Larick Machinery is a natural fit in the Pillar Machine product line. As Pillar Machine offers the highest quality woodworking CNC Machines in the US, Larick Machinery and their commitment to creating the most user-friendly and versatile profile sanders on the market was a natural fit.
This machine is part of the Larick Machinery lineup that is now offered exclusively by Pillar Machine.
MADE IN THE USA
All Pillar Machine Machines are built 100% in the USA.
The benefits of purchasing an American made machine extend far beyond simply supporting the “local” economy.
Additional benefits include.
Parts are all sourced from Vendors in North America.
This increases parts availability & and assures honest pricing.
Real Factory Support
When technical assistance is required you can often talk directly to the people that built, wired and tested your machine.