Call us at 801-965-1900 to order or
- Sort by Rating
The HP5D is designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors. The model HP5D is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the center section of the inside edge of the door stile and the entire inside edge of the door rail material. Standard Operations: A part is placed into the work zone referencing the back and side fences. The palm button is pressed, and the clamps secure the part into place. The machining is now ready to begin in the work zone. There are two fixed zones and two pop up zones standard in the base model HP5D allowing for pendulum processing. While the one part is being machined, the other zone(s) can be loaded and queued for machining. The standard HP5D is equipped with a single horizontal drill and glue/dowel insertion unit that is set up for 8 mm diameter dowels. The HP5D has 4 work zones, standard, with the left and right fences removable for the processing of longer length panels.