­

About Accu Service

This author has not yet filled in any details.
So far Accu Service has created 10 blog entries.

Miter Door Glue Process

Glue Process To glue the joint, coat the inside walls of the mortise, the bottom of the Mortise, as well as the back side of the mitered part (as shown in the picture). The idea is to not have too much glue that you have excessive hydraulic pressure in the joint. Also you don’t want [...]

By |March 30th, 2016|Tips & Tricks, Uncategorized|0 Comments

Learn The Assembly Process

Assembly Process The easiest way to assemble your five pieces (two stiles, two rails, and one panel) is to make a fixture on your assembly table like pictured below. The wood strips are 2” tall and have 1” of space between them. Lay your stiles in the last two spaces and rails in the first [...]

By |March 30th, 2016|Tips & Tricks|0 Comments

Mortise and Tenon Pin Length

Tenon and Mortise Centerline and Pin Length The tenon and mortise should be placed in a position that allows the pin in the assembly process to go thru the back of the door, thru the tenon and into the far side of the mortise enough to keep the joint closed while the glue is drying. [...]

By |March 30th, 2016|Tips & Tricks|0 Comments

Panel Size Calculator

  Click the link below to download our Excel file (xlsx.) panel size calculator. Panelsizecalculator

By |March 30th, 2016|Tips & Tricks, Uncategorized|0 Comments

Accu-Service – October / November 2015

By |October 31st, 2015|Accu-Service, Newsletters|0 Comments

Accu-Service – August 2015

By |August 1st, 2015|Accu-Service, Newsletters|0 Comments

Accu-Service – June 2015

By |June 1st, 2015|Accu-Service, Newsletters|0 Comments

Accu-Service – May 2015

By |May 1st, 2015|Accu-Service, Newsletters|0 Comments

Accu-Service – February 2014

By |February 1st, 2014|Accu-Service, Newsletters|0 Comments

Accu-Service – December 2013

By |December 1st, 2013|Accu-Service, Newsletters|0 Comments