If you are having trouble viewing this email please click link here


Contact us!

February 2014 Issue #2


Keep your MITERED DOORS looking great!

"Miter Door Tips and Tricks"

The tenon and mortise should be placed in a position that allows the pin in the assembly process to go through the back of the door, through the tenon and into the far side of the mortise enough to keep the joint closed while the glue is drying.

There will be lot of pressure in that joint until the glue dries, if the
pin doesn't go all the way through the tenon and into the far side of the mortise, as explained above, then you will experience the face of the joint being opened (as shown in the picture below)

To learn more tips and tricks to keep your miter door production running smoothly click here

Accu-Service can help with all Accu-Systems and Pillar Machine
Machines. We employee trained professionals that are capable of
fixing any issues that arise with your machine both over the phone
or onsite at your shop.



Accu-Service is open from 7:30am to 4:00 pm MST.


© 2014 Accu-Service | 1810 W 5000 S Taylorsville, UT 84129 | T: 800.369.5746 | F: 801.965.3999

To unsubscribe to this newsletter reply to this email with "unsubscribe" in the body of the reply.